diff --git a/hosts/gaming/configuration.nix b/hosts/gaming/configuration.nix
deleted file mode 100644
index 24d34d7..0000000
--- a/hosts/gaming/configuration.nix
+++ /dev/null
@@ -1,139 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system. Help is available in the configuration.nix(5) man page, on
-# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
-
-{ config, lib, pkgs, inputs, ... }:
-
-{
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-      inputs.home-manager.nixosModules.default
-    ];
-
-  # Use the systemd-boot EFI boot loader.
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  nix.settings.experimental-features = [ "nix-command" "flakes" ];
-
-  # networking.hostName = "nixos"; # Define your hostname.
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  time.timeZone = "Europe/Dublin";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "us";
-  #   useXkbConfig = true; # use xkb.options in tty.
-  # };
-
-  # Enable the X11 windowing system.
-  services.xserver.enable = true;
-  services.xserver.displayManager.sddm.enable = true;
-  services.xserver.windowManager.i3.enable = true;
-
-  # services.xserver.xkb.options = "eurosign:e,caps:escape";
-  services.xserver = {
-    xkb = {
-      layout = "us";
-      variant = "";
-    };
-  };
-  hardware.bluetooth.enable = true;
-
-  # Configure keymap in X11
-
-  # Enable CUPS to print documents.
-  services.printing.enable = true;
-
-  # Enable sound.
-  sound.enable = true;
-  hardware.pulseaudio.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  services.xserver.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  # users.users.alice = {
-  #   isNormalUser = true;
-  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-  #   packages = with pkgs; [
-  #     firefox
-  #     tree
-  #   ];
-  # };
-  users.users.liamm = {
-    isNormalUser = true;
-    description = "liamm";
-    extraGroups = [ "networkmanager" "wheel" ]; # Enable ‘sudo’ for the user.
-  };
-
-  home-manager = {
-    extraSpecialArgs = { inherit inputs; };
-    users = {
-      "liamm" = import ./home.nix;
-    };
-  };
- 
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
-  environment.systemPackages = with pkgs; [
-    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-    wget
-    alacritty
-  ];
-
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
-  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
-  # and migrated your data accordingly.
-  #
-  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
-  system.stateVersion = "23.11"; # Did you read the comment?
-
-}
-
diff --git a/hosts/gaming/hardware-configuration.nix b/hosts/gaming/hardware-configuration.nix
deleted file mode 100644
index fddc4d1..0000000
--- a/hosts/gaming/hardware-configuration.nix
+++ /dev/null
@@ -1,43 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/profiles/qemu-guest.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "ahci" "xhci_pci" "virtio_pci" "sr_mod" "virtio_blk" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-intel" ];
-  boot.extraModulePackages = [ ];
-
-  fileSystems."/" =
-    { device = "/dev/disk/by-uuid/5c0b32f9-9711-4483-9717-842706d4f901";
-      fsType = "ext4";
-    };
-
-  fileSystems."/home" =
-    { device = "/dev/disk/by-uuid/3a477a6e-f720-414b-ac19-16dadfb01d93";
-      fsType = "ext4";
-    };
-
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/FE97-DFFD";
-      fsType = "vfat";
-    };
-
-  swapDevices =
-    [ { device = "/dev/disk/by-uuid/cf76c3c2-7f63-4bd9-9480-4e935f60cf24"; }
-    ];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp1s0.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-}
diff --git a/hosts/gaming/home.nix b/hosts/gaming/home.nix
deleted file mode 100644
index 78d39a4..0000000
--- a/hosts/gaming/home.nix
+++ /dev/null
@@ -1,142 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  home.username = "liamm";
-  home.homeDirectory = "/home/liamm";
-
-  # You should not change this value, even if you update Home Manager. If you do
-  # want to update the value, then make sure to first check the Home Manager
-  # release notes.
-  home.stateVersion = "23.11"; # Please read the comment before changing.
-
-  # The home.packages option allows you to install Nix packages into your
-  # environment.
-  home.packages = [
-    pkgs.htop
-    pkgs.firefox
-    pkgs.git
-    pkgs.thunderbird
-    pkgs.neofetch
-    pkgs.tree
-    pkgs.cmake
-    pkgs.gnumake
-    pkgs.clang
-    pkgs.libtool
-    (pkgs.nerdfonts.override { fonts = [ "FiraCode" "DroidSansMono" ]; })
-
-    # # It is sometimes useful to fine-tune packages, for example, by applying
-    # # overrides. You can do that directly here, just don't forget the
-    # # parentheses. Maybe you want to install Nerd Fonts with a limited number of
-    # # fonts?
-    # (pkgs.nerdfonts.override { fonts = [ "FantasqueSansMono" ]; })
-
-    # # You can also create simple shell scripts directly inside your
-    # # configuration. For example, this adds a command 'my-hello' to your
-    # # environment:
-    # (pkgs.writeShellScriptBin "my-hello" ''
-    #   echo "Hello, ${config.home.username}!"
-    # '')
-  ];
-
-  # Home Manager is pretty good at managing dotfiles. The primary way to manage
-  # plain files is through 'home.file'.
-
-  home.file = {
-    # # Building this configuration will create a copy of 'dotfiles/screenrc' in
-    # # the Nix store. Activating the configuration will then make '~/.screenrc' a
-    # # symlink to the Nix store copy.
-    # ".screenrc".source = dotfiles/screenrc;
-  };
-
-  home.sessionVariables = {
-    EDITOR = "emacs";
-    GIT_EDITOR = "nvim";
-    NIX_SHELL_PRESERVE_PROMPT = 1;
-  };
-
-  # Let Home Manager install and manage itself.
-  programs.home-manager.enable = true;
-
-  # ENV/APPEARANCE SETTINGS
-
-  fonts.fontconfig = {
-    enable = true;
-  };
-
-  # BEGIN PROGRAMS
-
-  programs.bash = {
-    enable = true;
-    enableCompletion = true;
-    enableVteIntegration = true;
-    initExtra =''
-      export PS1='\[\e[1;m\e[1;33m\e[1;m\] \W\[\e[m\e[m\] 🐧 \[\e[1;32m\]~> \[\e[m\e[m\]'
-      set -o vi
-    '';
-    shellAliases = {
-      ls = "ls --color=auto";
-      ll = "ls -l";
-      la = "ls -lA";
-      ping = "ping -c 5";
-      kpx = "keepassxc-cli open";
-      nixbuild = "sudo nixos-rebuild switch --flake";
-      nixtest = "sudo nixos-rebuild test --flake";
-      vi = "\vim";
-      emacsd = "emacs --daemon";
-      emacsc = "emacsclient -c -a 'emacs'";
-      neofetch = "neofetch --ascii_distro nixos_small";
-      new = "source $HOME/.bashrc";
-      newbar = "pkill waybar; waybar &disown";
-      ".." = "cd ..";
-      set-github-var = "export GITHUB=$(sed -n 2p ~/documents/.git_keys)";
-      set-gitlab-var = "export GITLAB=$(sed -n 4p ~/documents/.git_keys)";
-    };
-  };
-  programs.emacs = {
-    enable = true;
-    # extraPackages = epkgs: [
-    #   epkgs.nix-mode
-    #   epkgs.magit
-    # ];
-  };
-  programs.neovim = {
-    enable = true;
-    package = pkgs.neovim-unwrapped;
-    vimAlias = true;
-    vimdiffAlias = true;
-  };
-
-
-  # BEGIN SERVICES
-
-  services.emacs = {
-    enable = true;
-    client = {
-      enable = true;
-      arguments = [
-        "-c"
-	"-a emacs"
-      ];
-    };
-    startWithUserSession = true;
-  };
-
-  services.flameshot = {
-    enable = true;
-    settings = {
-      General = {
-        disabledTrayIcon = true;
-        showStartupLaunchMessage = false;
-      };
-    };
-  };
-
-  services.gpg-agent = {
-    enable = true;
-    defaultCacheTtl = 1800;
-    enableSshSupport = true;
-  };
-
-  #services.nexcloud-client.enable = true;
-
-}
diff --git a/hosts/gaming/main-user.nix b/hosts/gaming/main-user.nix
deleted file mode 100644
index 254949c..0000000
--- a/hosts/gaming/main-user.nix
+++ /dev/null
@@ -1,27 +0,0 @@
-# main-user.nix
-{ lib, config, pkgs, ... }:
-
-let
-  cfg = config.main-user;
-in
-{
-  options.main-user = {
-    enable
-      = lib.mkEnableOption "enable user module";
-    userName = lib.mkOption {
-      default = "mainuser";
-      description = ''
-        username
-      '';
-    };
-  };
-
-  config = lib.mkIf cfg.enable {
-    users.users.${config.main-user.userName} = {
-      isNormalUser = true;
-      initialPasswork = "p4ss";
-      description = "main user";
-      shell = pkgs.bash;
-    };
-  };
-}